The cheapest complete CME bar and trade history we found is bundled in Sierra Chart (1-minute bars from June 2008, every trade from 2011, in packages from 26 USD a month as of November 2026), but it cannot be used outside the program. For files you can load into your own backtester, Databento sells CME history from June 2010, with a 199 USD a month plan that includes 1 year of trades. Under both sits a floor: Databento's CME market-by-order data (every individual order added, changed or cancelled) starts on 21 May 2017, the date its documentation gives for CME's introduction of full granularity for every order event.

Key takeaway

Choose the resolution first, then a source whose licence fits the tool you test in. Sierra Chart's documentation dates its CME tick archive from 2011 and 1-minute bars from June 2008, bundled in packages from 26 USD a month, but its support staff say the data may not be used outside the program. Databento's Standard plan, 199 USD a month as of November 2026, includes 16+ years of bars, 1 year of trades and 1 month of order-book data as files. Databento's CME MBO history starts on 21 May 2017.

This sheet is about history; live feeds are compared in our guide to futures data feeds.

Which resolution of historical futures data do you need?

You need the coarsest resolution (how finely the record is cut) that still contains the event your strategy acts on: daily bars for swing signals, 1-minute bars for intraday bar strategies, trades for limit-order fills, and order-book data for queue position or order flow. Each finer step costs more and reaches back less far.

Six resolutions are on sale for CME futures. From coarsest to finest: daily bars, 1-minute bars, trades (every print, usually called tick data), top of book (the best bid and offer), market by price depth (the 10 best price levels a side, MBP-10) and market by order (MBO). Databento's documentation says: "Schemas are grouped into four levels, which are also how Databento prices data". L0 is bars, L1 is trades and top of book, L2 is MBP-10 and L3 is MBO.

Which resolution a backtest needs has its own page, tick data versus bar data, and the difference between top of book and depth is in level 1 versus level 2 data. No vendor we found publishes how many gigabytes one year of ES trades or one month of ES MBO fills, so the comparison here runs on history depth, which vendors do publish.

Picture the six rungs as a ladder between two rails. On the Sierra Chart rail, daily bars reach back to 1970, 1-minute bars to June 2008, trades to 2011, and depth only 180 days. On the Databento Standard rail, bars cover 16+ years, trades and top of book 1 year, MBP-10 and MBO 1 month. Under the bottom rung runs a floor dated 21 May 2017, below which Databento has no MBO.

SIX RESOLUTIONS, TWO SOURCES, ONE FLOOR SIERRA CHART inside the program only DATABENTO STANDARD files, 199 USD a month RESOLUTION DAILY BARS L0 1970 16+ years 1-MINUTE BARS L0 June 2008 16+ years TRADES L1 2011 1 year TOP OF BOOK L1 not documented 1 year MBP-10 DEPTH L2 180 days 1 month MBO L3 not documented 1 month any plan: 9.5 years FLOOR: 21 MAY 2017 no Databento MBO before this date, at any price Bar length: history as of November 2026, log scale. Source pages fetched 19 November 2026. Sierra Chart dates apply to CME futures; Databento levels: L0 bars, L1 trades and top of book, L2 MBP-10, L3 MBO.
Every step down the ladder buys finer data and less history, and at the bottom rung the calendar, not the price, sets the limit.

Where can you get free historical futures data?

Free daily futures history is easy to find, and free intraday and tick history comes inside trading platforms, but none of the free sources in this sheet gives you exchange-grade tick files you can take elsewhere.

  • Investing.com offers daily S&P 500 futures history with a download button. Its own disclosure says prices may come from market makers rather than an exchange, "meaning prices are indicative and not appropriate for trading purposes."
  • Sierra Chart's trial includes the same CME history as its paid packages. Sierra Chart's futures data page says historical data is included "regardless of whether the data is real-time or delayed", and package prices exclude exchange fees for real-time data, so the archive does not require a real-time CME subscription.
  • NinjaTrader with a Rithmic, CQG, Continuum or NinjaTrader connection downloads historical tick, minute and daily data, according to NinjaTrader's data-by-provider table. An Interactive Brokers connection provides no historical tick data there, and neither does Barchart.
  • TradingView's free Basic plan shows all available daily data but caps intraday charts at 5,000 bars, covered below.

The claim that free CME tick history does not exist is only partly true: it exists inside Sierra Chart and NinjaTrader, tied to the software or to your connection. Free real-time data is a separate question, answered in our guide to free real-time futures data.

How far back does historical CME futures data go at each source?

As of November 2026, published starting points run from 1899 for PortaraCQG daily data to June 2010 for Databento's full CME dataset, with Sierra Chart's CME tick archive starting in 2011 and Databento's MBO starting on 21 May 2017.

SourceResolutionsCME history fromCost modelExport and licence
Sierra ChartDaily, 1-minute, trades, depthDaily 1970; 1-minute June 2008; trades 2011; depth last 180 daysIncluded in packages from 26 USD a month, and in the trialNot usable outside Sierra Chart
DatabentoAll six (L0 to L3)June 2010; MBO from 21 May 2017Standard plan 199 USD a month, or per GBFiles; no licence needed for T+1 data unless redistributed, per Databento
CME DataMineTime and Sales, MBO and more; more than 450 terabytesBenchmark markets back to the 1970sNot published on pages we could fetchNot stated
PortaraCQGDaily, intraday, tick (trades only and Level 1)Daily 1899; intraday and tick 1987Quote on requestNot stated
FirstRate Data1-minute to daily bars; three continuous adjustment typesES continuous 2 January 2008; contracts from ESZ08Price not in page text; updates 99.95 USD a year after the first monthNot on the product page
Kibot1, 5, 15 and 30-minute continuous bars; trades in a separate tick packageES 27 September 2009 (1-minute); tick package since 2009520 USD one-time for 83 symbols (1-minute bars); 1,420 USD one-time (tick)Internal use, 2 computers, no redistribution
NinjaTrader (Rithmic, CQG, Continuum or NinjaTrader connection)Tick, minute, dailyNot publishedBundled with the connectionExport function for tick, minute and day; provider terms not stated
TradingViewIntraday bars, daily5,000 to 40,000 intraday bars by plan; all daily dataPlans 12.95 to 199.95 USD a month, billed annuallyCSV of the bars on the chart
Interactive Brokers APIMinute and daily; no historical tick via NinjaTraderExpired contracts unavailable two years after expiryWith an account; 60 requests per ten minutesNot stated
Investing.comDailyNot statedFreeIndicative prices, per its disclosure

Compiled by Phoenix Technologies from each vendor's documentation, pricing or licence page, fetched 19 November 2026; "not stated" means the page we read does not say. Prices change, so check each vendor's current page before buying. History bundled with live feeds such as IQFeed, dxFeed and Rithmic is compared in our guide to futures data feeds.

The sheet splits into three groups: platforms that bundle deep history but keep it in the software, file vendors whose terms let you take the data away, and sources that publish neither a price nor a licence. Only the second group fits a Python or custom backtester without a question mark.

Converted to years of history as of 19 November 2026, FirstRate's ES series covers 18.9 years, Sierra Chart's 1-minute archive 18.5, Kibot's ES series 17.1, Databento's CME dataset 16.5, Sierra Chart's tick archive 15.9 (taking 1 January 2011, since Sierra Chart gives only the year) and MBO 9.5.

Picture these as bars on one timeline: the five bar and trade archives all begin between January 2008 and 2011, and Databento's MBO begins in May 2017, more than five years after the latest of them. CME's own DataMine sits as a bracket over the whole line, with benchmark markets back to the 1970s according to CME Group's datamine_python repository.

WHERE EACH CME ARCHIVE STARTS 1899 TO NOV 2026 CME DATAMINE: 1970s PortaraCQG daily 1899, own claim, quote Sierra Chart daily 1970 PortaraCQG intraday 1987, own claim, quote 189919701987 zoomed below ZOOM: BAR, TRADE AND MBO ARCHIVES, 2008 TO NOV 2026 200820112017 Nov 2026 FirstRate ES 1-minute from 2 Jan 2008, 18.9 years Sierra Chart 1-minute from June 2008, 18.5 years Kibot ES 1-minute from 27 Sep 2009, 17.1 years Databento CME dataset from June 2010, 16.5 years Sierra Chart trades from 2011, 15.9 years Databento MBO from 21 May 2017, 9.5 years more than five years later Years to 19 November 2026; Sierra Chart trades taken from 1 January 2011. Vendor pages fetched 19 November 2026.
Bar and trade archives all start between 2008 and 2011, so depth rarely decides between them; MBO is the odd one out at 9.5 years.

PortaraCQG's 1899 daily and 1987 intraday starts are its own claims, priced on request. Ask how its earliest records were captured before you test fills on them.

What does historical CME futures data cost?

As of November 2026, one year of ES 1-minute bars costs 26 USD inside Sierra Chart, 199 USD as a Databento Standard month (74 USD net of the new-user credit), 520 USD one-time in Kibot's package, and an unpublished amount at CME DataMine, FirstRate Data and PortaraCQG. The cheap option and the dear one are not the same product, because only one of them hands you a file.

We priced three fixed requests at every source that publishes enough to price them: A is one year of ES trades, B is one year of ES 1-minute bars, C is one month of ES MBO.

SourceA: 1 year of ES tradesB: 1 year of ES 1-minuteC: 1 month of ES MBOWhat you get
Sierra Chart Package 326 USD (one month)26 USD (same month)Not documented (depth kept 180 days)Use inside Sierra Chart only
Databento CME Standard199 USD (one month; L1 covers 1 year)199 USD (same month; L0 covers 16+ years)199 USD (same month; L3 covers 1 month)Files; 74 USD net in a new account's first month
Databento usage-basedPer GB, rate shown in portalPer GB, rate shown in portalPer GB, rate shown in portalFiles; 125 USD new-user credit
Kibot packages1,420 USD one-time (separate tick package, 83 symbols since 2009)520 USD one-time (83 symbols)Not offeredFiles for internal use on 2 computers
TradingView UltimateNo tick exportNot possible (about 29 sessions at most)Not offeredCSV of visible bars
FirstRate Data, PortaraCQG, CME DataMineNot publishedNot publishedDataMine lists MBO; price not publishedAsk before buying

Computed by Phoenix Technologies from Sierra Chart, Databento, Kibot and TradingView pages fetched 19 November 2026; method: one month of the cheapest plan that includes the request, Databento net figure = 199 - 125, 12-month cost = monthly price x 12. Kept for a year, Sierra Chart Package 3 costs 312 USD, its top Package 12 (Advanced Features and Market by Order, 56 USD a month) costs 672 USD, and Databento Standard costs 2,388 USD.

Databento's monthly price is 7.65 times Sierra Chart's, and what the difference buys is portability: the right to run the data in any tool you write. The 74 USD figure relies on Databento's dataset page, which says the 125 USD credit "applies to all of our historical data and subscription plans".

Picture the three requests as groups of bars on one dollar baseline. Request B shows four bars: Sierra Chart at 26 USD with a padlock for platform-only use, Databento at 74 USD in a new account's first month and 199 USD after, and Kibot at 520 USD one-time. Request A adds Kibot's tick package as an off-scale bar marked 1,420 USD one-time. Requests A and C carry fewer bars and more markers: "per GB, rate in portal", "quote", "not published" and, for TradingView, "not possible".

THREE REQUESTS, PRICED ON ONE BASELINE One month of the cheapest plan that includes the request, USD, as of November 2026. 26 USD SIERRA CHART 199 USD DATABENTO STANDARD 1,420 USD one-time KIBOT TICK ONE-TIME A: ES TRADES 1 year 26 USD SIERRA CHART 74 USD DATABENTO FIRST MONTH 199 USD DATABENTO STANDARD 520 USD KIBOT 1-MINUTE ONE-TIME B: ES 1-MINUTE 1 year 199 USD DATABENTO STANDARD C: ES MBO 1 month usable inside Sierra Chart only NO BAR TO DRAW per GB, rate in portal Databento usage-based quote PortaraCQG not published CME DataMine, FirstRate not possible TradingView, request B KEPT 12 MONTHS: Sierra Chart Package 3 312 USD Databento Standard 2,388 USD first month = 199 - 125 USD credit
The cheapest bar carries a padlock: 26 USD buys data you can only use inside Sierra Chart, while 74 to 199 USD buys files you keep.

Databento's Standard price rose from 179 to 199 USD a month on 22 June 2026; according to Databento's pricing announcement of 29 May 2026, existing subscribers "will continue at the current rate of $179/month for 12 months." Above Standard, Databento's CME catalog page lists Plus at 1,750 USD a month on an annual contract, adding 16+ years of L1 plus external distribution, and Unlimited at 4,500 USD a month on an annual contract, with "16+ years in all schemas".

Does "from $0.50/GB" make tick data almost free?

Nothing public shows that it does. Databento's futures page advertises historical data "from $0.50/GB", but its FAQ says "Databento meters data by its uncompressed size in binary encoding", and no public page we fetched prints the rate for each CME schema, which Databento shows in the logged-in portal. Databento's own API example lists a unit price of 280 USD per GB for historical OPRA options trades, so the floor price says little about the schema you need.

How much intraday futures history do TradingView and NinjaTrader give?

TradingView caps intraday charts at 5,000 to 40,000 bars depending on plan, which on a 1-minute ES chart is about 3.6 to 29 trading sessions, nowhere near a year. NinjaTrader's help guide does not publish how far back its servers go.

TradingView's help page on bar limits lists 5,000 bars on Basic, 10,000 on Essential and Plus, 20,000 on Premium, 25,000 on Expert and 40,000 on Ultimate, and adds that "these limits cannot be extended for now due to technical reasons." ES trades from Sunday 6:00 pm to Friday 5:00 pm ET with a 60-minute daily break from 5:00 pm, per NinjaTrader's contract page, so one session holds 1,380 one-minute bars.

TradingView planIntraday bar limitES 1-minute sessions covered
Basic5,0003.62
Essential, Plus10,0007.25
Premium20,00014.49
Expert25,00018.12
Ultimate40,00028.99

Computed by Phoenix Technologies; method: bar limit / 1,380 one-minute bars per 23-hour session. An illustrative year of 252 sessions holds 347,760 bars, about 8.7 times the Ultimate limit. Holiday early closes and quiet minutes with no trade shift these figures slightly.

Two TradingView pages disagree. The pricing page lists minute-level history of 180 days on Basic, 365 days on Essential, and "All" on Plus, Premium and Ultimate, while the help page gives the caps above. Export follows the chart either way, because TradingView says "The data you export is what your chart shows you." Deep Backtesting runs up to 2 million bars per calculation, about 5.75 years of ES 1-minute bars at 1,380 a session and 252 sessions a year, but it runs inside TradingView and produces no file.

A secondary source, Way of the Trader, says "NinjaTrader's servers keep tick data for about a year", with about 90 days of Market Replay data; treat both as approximate until NinjaTrader publishes them.

Why is market-by-order history so short?

Because CME introduced full granularity for every order event on 21 May 2017, according to Databento's documentation, Databento's CME MBO starts on that date, which caps its archive at about 9.5 years as of November 2026. Retail plans hold less: Databento Standard includes 1 month, and Sierra Chart keeps depth for 180 days.

Databento's CME dataset documentation explains the cutoff: "MDP 2 data predates the introduction of full-depth MBO by CME. Because of this, the MBO schema is not available." Before May 2017, Databento's finest CME history is MBP-10, and it lacks Databento's capture timestamps. The idea that ES MBO reaches back as far as bars for anyone who pays enough fails on the calendar, not the budget: even Databento's Unlimited plan, with "16+ years in all schemas", has no CME MBO before May 2017. CME DataMine also lists MBO among its datasets, but no page we could fetch gives its start dates.

Sierra Chart's limit is storage: "Market depth data is maintained on Sierra Chart servers for a maximum of 180 days." The insider move for order-flow traders is to stop buying and start keeping: record your own tick and depth data from today, and your archive grows past what any retail plan sells. Check first whether your feed is conflated, as explained in conflation and throttling, because a recording is only as complete as the feed behind it.

Can you export historical futures data into your own backtester?

It depends on the licence, not the export button: Sierra Chart data may not leave Sierra Chart, Databento and Kibot sell files for your own use, and NinjaTrader and TradingView have export functions whose data terms their pages do not spell out.

Sierra Chart support answered the question on 3 November 2026: "You are not permitted to export or use any of the data within Sierra Chart outside of Sierra Chart." The same Support Board reply adds that no Sierra Chart licence allows it. If you plan to stay inside the program, our Sierra Chart guide covers the platform itself.

Kibot's licence shows the typical vendor model: "The Data is for the Licensee's own internal use only." It allows two computers, no resale or redistribution, and says aggregate results such as backtest summaries may be shared. NinjaTrader can export stored tick, minute and day data as text files with end-of-bar UTC timestamps.

Picture a grid with five sources down the side and four permissions across: export a file, run it in your own backtester, share the raw data, share the results. Sierra Chart's row reads no, no, no, and not applicable for results. Databento reads yes, yes, licence needed, not stated. Kibot reads yes, yes on 2 computers, no, yes for aggregate results. NinjaTrader and TradingView show an export function and "terms not stated" in the other cells.

WHAT EACH SOURCE LETS YOU DO EXPORT A FILE USE IN YOUR OWN BACKTESTER SHARE THE RAW DATA SHARE THE RESULTS Sierra Chart 26 USD a month NO NO NO not applicable Databento 199 USD a month YES YES LICENCE NEEDED not stated Kibot 520 USD one-time YES YES, ON 2 COMPUTERS NO YES, AGGREGATE RESULTS NinjaTrader with the connection EXPORT FUNCTION terms not stated terms not stated terms not stated TradingView 12.95 to 199.95 USD CSV OF VISIBLE BARS terms not stated terms not stated terms not stated yes conditional no not stated Databento: licence needed to redistribute Sierra Chart Support Board (3 November 2026), Kibot licence, Databento licensing guide, NinjaTrader and TradingView help pages.
An export button is not a licence: the only fully red row belongs to the cheapest complete archive.

Do you need an exchange licence to use historical CME data?

Not for your own backtest, according to Databento's reading of exchange licensing: "You do NOT need a license to access historical (T+1) data." The exception that matters to traders is redistribution, meaning passing the raw data to anyone else.

Databento's 2023 licensing guide defines historical as data from 24 hours into the past and lists redistribution among the exceptions. It is a vendor's interpretation, not a CME statement, so confirm with your source before a commercial project. Live data is a different matter: non-display use and redistribution fees are explained in how CME market data fees work.

Which historical futures data source should you choose?

Pick the resolution your strategy acts on, then the cheapest source whose licence allows the tool you test in: inside a platform, the bundled archive usually wins; in your own code, a file vendor does.

Worked example: ten years of ES 1-minute bars in Python

Take an illustrative trader testing an ES opening-range strategy in Python: signals on 1-minute bars over 10 years, limit fills checked on 1 year of trades.

  1. Resolution: 1-minute bars for the signals and trades for the fills. No depth, no MBO.
  2. Tool: Python, so the data must leave the program it came from. Sierra Chart's 26 USD month drops out despite covering both, because of its export rule.
  3. Bars: Kibot's 520 USD package covers ES since 27 September 2009, 17.1 years, as continuous series only, so you inherit its roll method (see back-adjusted continuous series). Its trades come in a separate 1,420 USD tick package.
  4. Bars and trades: one Databento Standard month at 199 USD includes 16+ years of bars and 1 year of trades; a new account's 125 USD credit brings the first month to 74 USD.
  5. Unpublished: FirstRate Data covers ES from 2 January 2008, with individual contracts from ESZ08, but its price is not in the page text; PortaraCQG quotes on request.
  6. Check before paying: whether Databento's 1 year of L1 is a rolling window, and whether downloads stay usable after a subscription ends, are not stated on the pages we read. Ask.

Result: one Databento month covers both requests for 74 USD net, about a seventh of Kibot's 1-minute package price, while Kibot's one-time purchase suits a trader who wants ready-made continuous bars and no subscription. Ten years of bars matter more than they seem, because walk-forward testing needs years the strategy never saw, as covered in backtesting without overfitting.

Picture the choice as a flow that splits twice. Holding time and order type set the resolution, and the resolution sets the source: swing signals go to daily bars (Sierra Chart from 1970), intraday bar strategies to 1-minute bars (Kibot 520 USD one-time, Sierra Chart 26 USD a month in-platform, Databento L0 in Standard), limit-order fill models to trades (Sierra Chart from 2011 in-platform, Databento 1 year), and queue or order-flow models to MBO, which at Databento starts on 21 May 2017.

FROM STRATEGY TO DATA SOURCE WHAT IT ACTS ON RESOLUTION INSIDE A PLATFORM Sierra Chart stays inside IN YOUR OWN CODE files you keep HOW LONG DO YOU HOLD, WHAT ORDER TYPE? SWING holds for days DAILY BARS Sierra Chart daily from 1970 Databento L0 16+ years in Standard INTRADAY BARS bar signals 1-MINUTE BARS Sierra Chart 26 USD a month Kibot 520 USD one-time Databento L0 in Standard LIMIT FILLS fill model TRADES Sierra Chart trades from 2011 Databento trades 1 year in Standard ORDER FLOW queue position MBO Sierra Chart MBO not documented Databento MBO 1 month in Standard Databento: nothing before 21 May 2017 Prices and depths as of November 2026, from vendor pages fetched 19 November 2026.
Two questions settle the purchase: what event your strategy acts on, and where you will run the test.
  • If your strategy holds for days, use daily history from your platform or Sierra Chart, and never test fills on indicative prices.
  • If you test inside a platform and can run Sierra Chart, its 26 USD a month package is the cheapest documented complete CME archive: 1-minute from June 2008, trades from 2011.
  • If you test bar strategies in your own code, compare Kibot's 520 USD package with one Databento Standard month, and check how each handles contract rollover.
  • If your edge depends on limit fills, buy trades, not bars; beyond Databento Standard's 1 year, compare Kibot's 1,420 USD one-time tick package (continuous series since 2009) with Databento's per-GB rate in its portal.
  • If your edge depends on queue position, Databento's CME MBO reaches back only about 9.5 years, so start recording your own now.
  • If a seller names no operator, data origin or licence, do not buy. One site that appears in search results for this query offers ES tick records with 1-minute bars from March 2010 for 59 USD one-time, and its homepage states none of the three.
  • If you will pass raw data to anyone, get a redistribution licence before you build anything.

Go deeper

Frequently asked questions

Can I get NQ historical data from the same sources?

Yes at the CME-wide sources. Databento's CME dataset has full coverage of all futures and options on futures from June 2010, and Sierra Chart's dates apply to CME, CBOT, NYMEX and COMEX futures generally. Kibot's 1-minute package covers 83 symbols back to 2009, so check its symbol list for NQ before buying.

Does the Databento free credit expire?

Yes, after 6 months. Every new Databento user receives 125 USD in credit, and the CME dataset page says it applies to historical data and subscription plans alike. Use it in the month you need the data.

Does CME sell historical data directly?

Yes, through CME DataMine, which CME Group describes as holding more than 450 terabytes of historical data, with benchmark markets back to the 1970s. Its datasets include Time and Sales and MBO market depth. No price appeared on any page we could fetch, so ask CME for a quote.

How much historical futures data does Interactive Brokers provide?

Interactive Brokers' API documentation lists expired futures data older than two years from expiration as unavailable. It also limits you to 60 historical requests in any ten-minute period, which slows bulk downloads.

Does Sierra Chart have Eurex historical data?

Yes. Sierra Chart's historical data page dates Eurex tick data from 2013 and Eurex 1-minute data from 2010. Sierra Chart support says Eurex data cannot be exported from the software, because the exchange does not permit it.

How many daily data requests does Sierra Chart allow?

3,000 historical daily data requests a month by default for futures and index symbols, according to Sierra Chart's historical data documentation, and the limit can be raised on its Services Activation page. Intraday download limits are not published.

Does FirstRate Data charge for updates after purchase?

Yes. FirstRate Data's ES page includes 1 month of free updates, after which an annual subscription of 99.95 USD is required. The purchase price itself was not in the page text we read.

Can I get historical ES data from before 2008?

Yes, at daily resolution and from a few sources that price on request. Sierra Chart's daily CME bars reach back to 1970, CME DataMine holds benchmark markets back to the 1970s, and PortaraCQG claims daily data from 1899 and intraday and tick data from 1987, priced on request. The retail file vendors in this sheet start their ES intraday series between January 2008 and 2010.

Sources

  1. Sierra Chart (2026), Sierra Chart Historical Data Service
  2. Sierra Chart Support Board (2026), License question - using paid for downloaded historical data.
  3. Databento (2026), CME Globex MDP 3.0: Data feed specifications
  4. Databento (2026), CME Globex MDP 3.0 | CME futures historical & live data API
  5. Databento (2023), Market data licensing FAQ part 1: Introduction to market data exchange licensing
  6. TradingView (2026), Historical intraday data: bars and limits explained
  7. NinjaTrader (2026), Data by Provider
  8. Kibot (2026), License agreement
  9. CME Group (2026), datamine_python
  10. Investing.com (2026), S&P 500 Futures Historical Price Data
  11. Kibot (2026), All Futures Continuous Contracts 1-Minute Intraday Data
  12. Kibot (2026), Buy Kibot Historical Market Data